T-H Marine Troll-Tamer Trolling Motor Stabilizer Lock Minn Kota Fortrex 5″-8″ Spacing

The T-H Marine Troll-Tamer Trolling Motor Stabilizer Lock Minn Kota Fortrex 5″-8″ Spacing is a heavy-duty support and locking system designed to secure a compatible bow-mounted trolling motor while it is stowed. The RMC-101FMK-DP configuration is designed for compatible Minn Kota Fortrex and Ultrex installations requiring approximately 5 to 8 inches of motor-to-deck spacing.

Constructed from 300 Series stainless steel, the Troll-Tamer provides a solid support point that helps control trolling-motor bounce, vibration and unwanted movement during transport or rough-water operation.

Official T-H Marine Troll-Tamer Compatibility Guide

T-H Marine Troll-Tamer RMC-101FMK-DP Specifications

Brand: T-H Marine
Series: Troll-Tamer
Model / MPN: RMC-101FMK-DP
Product Type: Trolling Motor Stabilizer Lock
Primary Compatibility: Minn Kota Fortrex
Additional Compatibility: Select Minn Kota Ultrex installations
Motor-to-Deck Spacing: 5″-8″
Construction: 300 Series stainless steel
Application: Foot-controlled bow-mount trolling motors
Purpose: Supports and secures the trolling motor while stowed
Release Design: Quick-release system
Corrosion Resistant: Yes
Installation: Deck-mounted stabilizer system

For related trolling-motor products, explore marine accessories at Precision Marine Outdoors.

Designed for Minn Kota Fortrex

The T-H Marine Troll-Tamer RMC-101FMK-DP is a Fortrex-compatible stabilizer for boats where the trolling motor sits approximately 5″-8″ above the deck at the stabilizer mounting location.

The Fortrex is a substantial bow-mounted trolling motor, and movement while running across rough water can place repeated stress on both the motor and its mounting system. Adding a properly fitted stabilizer provides another support point when the motor is fully stowed.

The result is a more secure trolling-motor installation during travel without interfering with normal operation once the Troll-Tamer has been released.

Helps Control Trolling Motor Bounce

One of the primary reasons to install the T-H Marine Troll-Tamer Minn Kota Fortrex 5″-8″ is to reduce trolling-motor bounce.

A stowed bow-mounted motor can experience significant vertical movement when a boat encounters wakes, waves or rough water. Instead of allowing all that movement to be transferred through the primary trolling-motor mount, the Troll-Tamer provides additional mechanical support.

This helps minimize unnecessary movement and provides additional protection for the trolling motor, mount and surrounding bow area.

300 Series Stainless-Steel Construction

The Troll-Tamer uses 300 Series stainless-steel construction, giving it the strength and corrosion resistance needed for marine environments.

This construction makes the stabilizer suitable for anglers who frequently trailer their boats or operate in conditions where a trolling motor may experience repeated vibration and movement.

Unlike a simple cushioning device, the Troll-Tamer creates a solid mechanical support point for the stowed motor.

5″-8″ Motor-to-Deck Spacing

Correct sizing is essential when choosing a Troll-Tamer.

The RMC-101FMK-DP is the configuration for compatible Fortrex installations requiring 5″-8″ spacing. The measurement refers to the installation distance between the trolling-motor mount and the boat deck at the intended Troll-Tamer location.

T-H Marine offers other FMK configurations for shorter distances, so customers should measure their boat rather than selecting a stabilizer solely because they own a Fortrex.

Check T-H Marine Troll-Tamer fitment and compatibility

RMC-101FMK-DP vs. Other Fortrex Troll-Tamers

T-H Marine offers several related Fortrex-compatible stabilizers for different installation heights. The RMC-101FMK-DP is the longer 5″-8″ configuration.

If the motor-to-deck distance is shorter, another FMK model may be more appropriate. Because some ranges can overlap, measuring the actual boat installation is important before ordering.

This distinction is especially useful on an online product page because customers searching for a “Fortrex Troll-Tamer” may not realize that multiple sizes are available.

Quick-Release Operation

The Troll-Tamer is designed to secure the trolling motor while still allowing convenient deployment when it’s time to fish.

Once properly installed, the stabilizer supports the Fortrex in its fully stowed position. Before deploying the trolling motor, the locking mechanism is released so the motor can move normally.

The system should always be positioned so it cannot interfere with the trolling motor’s steering, shaft, deployment mechanism or other moving components.

Strong Upgrade for Rough-Water Anglers

The T-H Marine Troll-Tamer Trolling Motor Stabilizer Lock Minn Kota Fortrex 5″-8″ Spacing is particularly useful for anglers who routinely operate on larger lakes, reservoirs or other waters where wakes and chop can cause substantial bow movement.

It can also be useful when trailering because it provides another support point for the trolling motor while the boat is being transported.

For rough conditions, an appropriate trolling-motor hold-down strap can provide additional security alongside the stabilizer.

Fortrex and Ultrex Compatibility

Although this configuration is commonly marketed for the Minn Kota Fortrex, the RMC-101FMK-DP is also associated with compatible Ultrex installations within the appropriate spacing range.

Compatibility should therefore be based on two factors: the exact trolling-motor model and the actual motor-to-deck measurement.

Do not assume that every Minn Kota bow-mount motor uses the same Troll-Tamer. Wireless/electric-steer motors such as certain Terrova configurations use different clamp-on Troll-Tamer models.

How to Choose and Use the Troll-Tamer

With the trolling motor fully stowed, measure the distance at the intended Troll-Tamer mounting location. Confirm that the installation falls within the 5″-8″ range and that the exact trolling motor is compatible with RMC-101FMK-DP.

Install the stabilizer according to T-H Marine’s instructions so the motor is properly supported without interfering with deployment or steering.

Before deploying the Fortrex, release the stabilizer and verify that the trolling motor has unrestricted movement.

For additional compatible equipment, shop trolling motors and accessories at Precision Marine Outdoors.

Frequently Asked Questions

What is the model number?

The T-H Marine Troll-Tamer Minn Kota Fortrex 5″-8″ configuration is RMC-101FMK-DP.

Does RMC-101FMK-DP fit Minn Kota Fortrex?

Yes. It is designed for compatible Minn Kota Fortrex installations with the appropriate motor-to-deck spacing.

What spacing does this model support?

This configuration is designed for approximately 5″-8″ of motor-to-deck spacing.

Does it also fit Minn Kota Ultrex?

The FMK configuration can be used with compatible Ultrex installations when the motor model and required spacing match the manufacturer’s fitment guidance.

What is the Troll-Tamer made from?

The system uses 300 Series stainless steel, providing strong corrosion-resistant construction suitable for marine use.

What does the Troll-Tamer do?

It supports and secures a trolling motor in its stowed position, helping reduce bounce, vibration and unwanted movement.

Is it useful for rough water?

Yes. Reducing movement of the stowed trolling motor is particularly valuable when crossing wakes or operating in choppy conditions.

Is this the same model used for Minn Kota Terrova?

No. Compatible Terrova applications use different clamp-on Troll-Tamer configurations. Always select the model according to the trolling motor and installation measurement.

Should I measure before ordering?

Yes. Measure the motor-to-deck distance at the intended mounting point before choosing a Troll-Tamer. This is important because T-H Marine offers multiple stabilizer sizes for different installations.