Garmin Trolling Motor Barrel Mount for LVS34

The Garmin Trolling Motor Barrel Mount for LVS34 is a genuine Garmin mounting accessory designed to securely install a compatible LiveScope Plus LVS34 transducer on the barrel of a trolling motor. Garmin identifies this accessory as part number 010-13228-01. Its adjustable design uses molded teeth and is designed to accommodate different trolling motor barrel diameters, including popular Minn Kota and MotorGuide models.

According to the official Garmin Trolling Motor Barrel Mount product page, the mount is specifically compatible with the LiveScope Plus LVS34 transducer and LiveScope Plus System with GLS 10 and LVS34.

Garmin LVS34 Barrel Mount Model & Compatibility

Brand: Garmin
Product: Trolling Motor Barrel Mount
Part Number: 010-13228-01
Product Type: Transducer mounting accessory
Compatible Transducer: LiveScope Plus LVS34
Compatible System: LiveScope Plus System with GLS 10 and LVS34
Mounting Location: Trolling motor barrel
Adjustment: Molded-tooth adjustable design
Supported Sonar Views: Forward and Down when barrel-mounted

Garmin states that this mount fits trolling motor barrel diameters including those found on popular Minn Kota and MotorGuide trolling motors.

For additional compatible equipment, explore Garmin marine electronics and accessories at Precision Marine Outdoors.

Designed for Garmin LiveScope Plus LVS34

The Garmin Trolling Motor Barrel Mount for LVS34 provides a manufacturer-designed mounting solution for anglers using Garmin’s LiveScope Plus technology.

Garmin’s official LiveScope Plus LVS34 installation guide explains that an LVS34 installed on the trolling motor barrel can provide Forward and Down views. Perspective view requires the appropriate perspective mounting arrangement instead.

This makes the barrel mount useful for anglers who want their LiveScope transducer positioned directly on the trolling motor while retaining the ability to adjust between supported Forward and Down orientations.

How to Use the Garmin LVS34 Barrel Mount

Position the mount on the appropriate area of the trolling motor barrel following Garmin’s installation instructions. Garmin’s procedure uses a rubber liner and hose clamp to secure the mount to the trolling motor barrel. The LVS34 transducer is then attached to the mount using the specified mounting hardware.

The transducer cable should be secured and routed so that it cannot contact the propeller, become pinched as the motor deploys or stows, or run unnecessarily close to sources of electrical interference.

Garmin’s adjustable orientation allows the transducer to be repositioned between supported Forward and Down views. The manufacturer recommends aligning the markings on the transducer and mount before tightening the adjustment knob.

For general educational background about trolling motors, see the Wikipedia overview of trolling motors.

You can also explore trolling motors, sonar and marine accessories at Precision Marine Outdoors when planning a compatible Garmin fishing-electronics setup.

Frequently Asked Questions

What is the Garmin LVS34 barrel mount part number?

The Garmin Trolling Motor Barrel Mount for LiveScope Plus LVS34 is 010-13228-01.

Is this mount compatible with the Garmin LVS34?

Yes. Garmin specifically lists the LiveScope Plus LVS34 Transducer as compatible.

Does it fit different trolling motor barrel sizes?

Yes. Garmin says its molded-tooth adjustable design fits all barrel diameters, including those used on popular Minn Kota and MotorGuide trolling motors.

Which LiveScope views can I use?

With the LVS34 mounted on the trolling motor barrel, Garmin supports Forward and Down views. Perspective view is not supported with the barrel-mount configuration.

Can the transducer angle be adjusted?

Yes. Garmin’s mounting system allows the LVS34 orientation to be adjusted between Forward and Down positions.